Products
Application
XYZAC five-axis linkage
Positioning accuracy: 0.005mm/full stroke
Repeatability: <0.005mm/full stroke
|
|
Items | VMC850S | |
|---|---|---|---|
| Table | Table Dimension | 1000*550 mm | |
| Table Load | 750kg | ||
| T-slot (Width x Distance x Numbers) | 18T*100*5mm | ||
| Travels | X-axis Travel | 800mm | |
| Y-axis Travel | 520mm | ||
| Z-axis Travel | 560mm | ||
| Distance from Spindle to Table | 160-720mm | ||
| Spindle | Type of Spindle Taper | BT-40 | |
| Driving Mode | Direct Connection | ||
| Speed Range | 10000-15000 rpm | ||
| Magazine | Max.Magazine Capacity | 24 tools | |
| Tool Dimension | BT-40 | ||
| Max.Tool Diam. | Ø75mm | ||
| Max.Tool Length | 300 m | ||
| Max.Tool Weight | 7 kg | ||
|
|
Controller | SYNTEC/SIEMENS | |
| Feed | Cutting Feed Speed Range | 1-12 m/min | |
| X-axis Rapid Traverse | 30-36 m/min | ||
| Y-axis Rapid Traverse | 30-36 m/min | ||
| Z-axis Rapid Traverse | 30-36 m/min | ||
| Motor | XY/Z/B/C Shaft Motor | 2*2*3*1.1*1 KW | |
| Spindle Motor | 7.5 kW | ||
| Magazine Motor | 550 W | ||
|
|
Air Pressure Requirement | 7 kg/cm² | |
|
|
Spindle Coolant | 1000 W | |
|
|
Chute Auto Lube | 100 W | |
|
|
Total Power Consumption | 18.5 kW | |
|
|
Water Tank Capacity | 260 Liter | |
|
|
Sheet Metal Design | Full Cover | |
|
|
Chip Disposal | Rear Discharge | |
|
|
Out Dimension | 2700*2220*2900(mm) | |
|
|
Machine Weight | 5000kg | |
|
|
C-axis Table | Rotary Axis | Tilted Axis |
|
|
Table Dimension | θ170 sq.65 | |
|
|
Reference Aperture | θ40H7 mm | |
|
|
Min.Setting Unit | 0.001° deg | 0.001° deg |
|
|
Accuracy of Segmentation | 20" sec. | 50" sec. |
|
|
Repeat Positioning Accuracy | 4" sec. | 8" sec. |
|
|
Locking Mode(Air Pressure Requirement) | 6 kg/cm² | 6 kg/cm² |
|
|
Locking Torque | 31kg/m | 31kg/m |
|
|
Allow Workload | 60(0° Horizontal)/40(0° -90°) kg | |
|
|
Reduction Gear Ratio | 1:72 | 1:90 |
|
|
Max. Speed of Dividing Disc | 41.6 rpm | 33.3 rpm |
|
|
Tolerant Cutting Force | 18 kg | |
